Pros of Hot Water Recirculation Pumps

Pros of Hot Water Recirculation Pumps

When considering the purchase of a new water heater, many Americans turn to the idea of a hot water recirculation pump. If you’re thinking about buying a new water heater for your home, installing a hot water pump might be worth considering. Hot water recirculation pumps are very effective at pumping hot water throughout your plumbing system and can often save homeowners money on their utility bills.

Benefits of a Recirculation Pump

A hot water recirculation pump is a great alternative to upgrading your water heater unit entirely.

Hot water recirculation pumps are also useful in situations where you have already done away with your old water heater and are now using a new tankless or instantaneous electric boiler, which may not have the same facilities to allow for the natural circulation of heated and cooled water throughout your home.

Other popular uses for hot water recirculation pumps include:

Many homeowners are interested in the use of hot water recirculation pumps but are not sure what they do or how they work. Knowing this information can help you to decide if this is a pump you need and, if so, how it can best be used for your needs.

  • Recirculating pumps use less water than a constant flow pump and provide instant hot water from the faucet to wash hands with cold water.
  • They work by taking cold water from the cold water supply line and heating it in the pump, then returning it to the hot water supply line.
  • Hot water recirculation pumps can be used to eliminate the need for a separate tank or booster heater and can save on your gas or electric bill.
  • Recirculating pumps are small in size but are capable of producing large volumes of heated water.
  • They stand about 8 inches tall and provide a flow rate of up to 3 gallons per minute.
  • They are used in lieu of a continuous flow heater, space-saver tankless water heaters, and space-saver tankless booster pumps.
  • In some cases, recirculation pumps work to effectively reduce your energy bills by as much as 50%.

The WaterQuick Pro hot water recirculation pump is a great example of technology that is used in conjunction with your tankless water heaters or standard water heaters.

Contact us today for your WaterQuick Pro hot water recirculation pump or any other questions you may have about your hot water recirculation pump.

Water Conservation Facts

Water Conservation Facts

Not to speak the obvious or anything, but the water in your toilet tank is what flushes your toilet. Now that may seem like a no-brainer, but it’s important to note that if you are not mindful of how much water you use when cleaning the toilet then ultimately not only can it lead to an overflowing tank and a flooded bathroom, but also high water bills.

Fortunately for us here in this post, we are going to go over many ways on how we can conserve water when using our toilets.

These tips include:

  • Flush your toilet as little as possible which should result in lowering your monthly bill.
  • Take shorter showers to save water.
  • Ways on how you can also conserve and lower water bills.

Now let’s get started!

Flush Your Toilet as Little as Possible – When it comes to conserving water for your toilet, one of the most important ways that you can do this is by flushing your toilet as little as possible. However, what many people may not know about flushing is that there are two types of flush mechanisms: the Gravity Flush and the Pressure Flush.

  • Gravity Flush toilets are older, and most people are probably using them. These toilets contain an average of around 4 gallons of water per flush. This is a great way to conserve water, but it does have some drawbacks. One of the drawbacks that you may face with this toilet is that it requires more time to flush the toilet completely, which means you’ll have to wait longer for your bathroom to be uncluttered and usable again.
  • Pressurized Flush toilets are more modern looking than other types and in comparison utilize around 1 gallon or less in water per flush. Now, you may be saying to yourself “This is awesome! A toilet that uses one gallon of water per flush. I should go out and buy this now!” but there is a catch. Not only are these toilets more expensive, but they also require a pressure tank as well as a pump. The pump will run continuously in order to create the pressurized flushing power, which means it will drain your water bill faster.

These toilets are great for conserving water, but they aren’t for everyone because of how much they cost and how the pressure system works in order to operate efficiently. However, if you are able to afford it and have the space for it in your bathroom then this would be an ideal toilet-type option for you.

Take shorter showers to save water – You heard it right! If you reduce the length of your showers, then you can save water as well as money because both water and money will be conserved (money saved) during this time period.

Ways on How You Can Also Conserve and Lower Water Bills

  • Don’t leave your water running while you brush your teeth or shave as this wastes a lot of water in a short period of time.
  • If your toilet is continually dripping water, then it will waste a lot of water in the long run, so make sure to check for leaks if you suspect that your toilet is leaking.

Paying more money each month can be annoying, but these tips and tricks will help you save money every month. Also, with these tips and tricks, and not waste as much water or money.

One last thing to remember is that if you have a leaking toilet then you can actually use your water bill as an incentive to replace your toilet. This will help conserve even more water also.

WaterQuickPro helps you conserve water, too. Check out more here.

Is a Hot Water Recirculating Pump Worth It?

Is a Hot Water Recirculating Pump Worth It?

A Hot Water Recirculating Pump Is a Useful System

A recirculating pump will draw water from your fresh cold-water line and push it back into your hot-water heater through the drain valve so that it could circulate continuously with no stops. It can save a person hundreds of dollars per year since a lot of money is wasted by just dumping unused hot water down the drain. You may also preserve the life of the heating system in your home, which would otherwise be used up at a much quicker pace.

Easy to Maintain and Install

A hot water recirculating pump is easy to install and maintain as well, which is why it’s highly recommended by plumbers around the country. All you need to do are some minor adjustments following the instructions in the manual of your unit.

Saves You a Lot of Money

  • A hot water recirculation pump can save you a lot of money every month by eliminating waste and providing clean water constantly to your hot tank. Customers who choose to use a hot water recirculation pump in their home can easily recoup their cost in a year or so! So if you are experiencing any cold water issues or want to invest in a long-lasting system for your plumbing, then you should consider installing one of these units.
  • A hot water recirculating pump saves money and energy by keeping the water in your hot water tank from constantly being heated every time you turn on a tap. It is an energy-efficient recirculating pump that is just as cost-effective and functional as any other type of hot water system.
  • A hot water recirculating pump saves money because it pumps the water from your tank to your faucet at an accelerated rate without wasting all the water while waiting for it. This means that less of your expensive electrical energy is needed to provide instant hot water, and this can be a huge saving for families or offices with multiple people using hot showers or baths often.

There’s no need to wait for ages when you could be using that hot water instantly with a WaterQuick Pro. Order yours today.

Do Recirculation Pumps Save Money?

Do Recirculation Pumps Save Money?

Let’s talk about the benefits and costs of using recirculation pumps. We’ll give a high-level overview of whether or not you should be using a recirculation pump in your water heater.

Who will find this article helpful: hot water system owners, water heater contractors, property owners, plumbers, heating engineers

If you are considering whether or not to install a recirculation pump in your existing water heater, then this blog is definitely for you. There are two main benefits to using a recirculation pump in your existing water heater.

First, if you are not using a recirculation pump then the water removed from the tank is circulated back through the system, as opposed to constantly being dumped into your drain or sewer system. This removes more water from the tank, which reduces corrosion and prevents the formation of mineral deposits in your water heater.

Second, incorporating a recirculation pump into your system can save you money. Recirculation pumps can be used as an extra-hot cycle to boost efficiency and reduce the use of your tank’s hot surface area by circulating hot water back to it (this reduces the energy required for heating). Thus, in a home where hot water is used sparingly (which is the majority of homes), this can help reduce energy costs.

Things to remember with recirculation pumps installed at home is that some pumps like Chillipepper and ACT Metlund must be turned off during periods when you need to drain your tank. Thus, it is assumed that a home uses a recirculation pump when hot water has been used, and then if hot water is desired again in the near future that the pump can be turned back on.

When using a recirculation pump, what do you have to consider besides whether or not it would be useful? There are two things you have to take into account: cost and time.

The WaterQuickPro is a water recirculation pump system that is very effective at recirculating hot water to your faucets and showers. If you want to save money with faster hot water, go with the WaterQuickPro.

The WaterQuickPro recirculation pump will help you save water by eliminating the need for a hot water draw.

Benefits of using WaterQuickPro II:

  • Reduce operating costs by up to 50%.
  • Eliminate corrosion caused by water sitting in pipes.
  • Save energy by heating the minimum amount of water required.
  • No need to dump water from tanks.
  • Prevent mineral buildup in pipes and heaters from hot water standing in the tank.

Order your WaterQuickPro today!